PM4 Crescent high speed sanitary paper machine started smoothly On September 26, the PM4 high-speed sanitary paper machine of Nanning Shengda Paper Co., Ltd. was successfully started and put into operation. The paper machine is a crescent paper machine, provided by Zhucheng Dazheng Machinery Technology Co., LTD., the width is 2850mm, the design speed is 1600m/min, the design capacity is about 17,000 t/a. In November 2018, Shengda Paper's first toilet paper machine provided by Dazheng Machinery was put into production, and so far there have been four high-speed toilet paper machines, with a total production capacity of 72,000 t/a of household paper.
Read MoreThe differences between wet non-woven fabric and wet paper making a) The raw materials used are different: wet paper making usually uses only plant fibers (chemical or mechanical wood pulp), while wet non-woven fabrics must contain a certain amount of chemical fibers. b) Different production equipment: wet paper making is usually produced by long mesh, round mesh or grip-mesh paper machines, while wet non-woven fabrics are usually produced by inclined mesh non-woven fabric machines. c) The production process is different: wet paper making is mainly formed by the chemical bond on the surface of wood pulp fiber, while wet non-woven fabrics are usually formed by the consolidation process such as chemical bonding and hot drying bonding.
Read MoreMajor breakthrough in Tomita's innovative technology For a long time, sanitary products manufacturers use a single piece of equipment to produce multi-size products, when faced with product code change, not only the debugging cycle is long, the process is complicated, but also cause a lot of waste. How to reduce waste, shorten the code conversion cycle, and reduce the difficulty of debugging are the key challenges facing the industry. Tomita organized a professional research and development team, after repeated testing and verification, finally successfully developed a new generation of welding and cutting integrated flexible production system. The advantages of this system are: 1) It can carry out the flexible production of one-button code modification, realize the flexible production of menstrual pants and pull-up pants by one device, and greatly save the initial cost of equipment, the cost of code modification time and the cost of debugging materials. 2) To achieve product ultrasonic welding and slitting process integration, shorten the process flow, improve the stability of equipment operation. 3) The welding cutting area can be controlled within 3mm, and can accurately ensure the cutting phase, compared with the prior art of 10mm, improve the aesthetics at the same time, to achieve material savings. 4) The choice of materials and welding patterns is more compatible, solves the problem of ultrasonic high-speed welding of hot air fabrics, and increases the flexibility of pattern design. 5) Can adapt to high-speed production, menstrual pants can reach 400 pieces /min stable production, baby diapers can reach 800 ~ 1000 pieces /min. Reference www.sohu.com
Read MoreSGN Non-woven fabrics adds Reicofil 5 production line Saudi-german Non-woven fabrics (SGN) has invested in a new Reicofil 5 spun-melt non-woven fabrics production line at its facility in Saudi Arabia, focusing on the production of sustainable quality products. Haitham Al Hudhaif, President of SGN, said: "With the investment in the new R5 production line, SGN has increased capacity and is better positioned to meet the global market demand for sustainable and quality products. At present, SGN's non-woven fabrics have an important position in the market for baby diapers, adult incontinence products and feminine hygiene products materials, and maintain long-term cooperative relationships with multinational and regional brands. In addition, the company operates multiple distribution centers in Europe and North America, providing flexible and 'local' supply." SGN already has four Reicofil production lines, and the new Reicofil 5 (RF5) line will be used to produce two-component and high-volume non-woven fabrics, increasing the company's production capacity for high-quality materials to meet the needs of customers seeking more high-end materials. Reference www.sohu.com
Read MoreFenlin Fenbao Kemi successfully started operation After a successful trial run, the Fenlin Group's new bio-products plant in Kemi, Finland, was fully switched on and put into production on September 20, as planned. Operating entirely without the use of any fossil fuels, the Kemi Bio-products plant will produce 1.5 million tons of coniferous wood pulp and hardwood pulp annually, as well as a variety of biomass products and 2 billion kwh of renewable electricity, with the plant's electricity self-sufficiency rate reaching a staggering 250%. The new plant will be world-class in terms of production efficiency, environmental efficiency and energy efficiency.
Read MoreRockline Industries reaches safety milestone The Arkansas Department of Labor recognized Rockline Industries-Northwest Arkansas (NWA) for its safety excellence with an "Elite Company" award. The plant has worked 16 million consecutive hours without an LTA. Rockline is a world-renowned manufacturer of wet wipes and has a strong reputation in the United States for its excellent safety record and good working conditions. Rockline NWA has had no downtime in over 12 years. In 2021, Forbes magazine announced that Rockline Industries was ranked 69th on its list of "America's 500 Best Midsize Employers." Rockline attributes its success to the hard work and dedication of its employees, who are the driving force behind Rockline's safety culture. It is their commitment to workplace safety and high vigilance in their daily work that prevents safety incidents from occurring.
Read More702 Jiabao Business Bulding,Beiqing East Road Beifeng Community,Fengze District,Quanzhou City,Fujian Province China.
0086-595-28862576
Scan To Wechat
русский
español
português
العربية
한국의
